Hi Phil,
it seems my Card arrived finally in Japan :-)
The Error you describe is very strange. It should work in any of the 3
slots.
I tested it in one of my Lisas, before I wrapped the card and sent it
to you. I don't remember in which slot I put it for testing... but it
should work in all three
greetings TOM from Bavaria
... on holiday from 26th may to 15 june
Am 25.05.2006 um 15:18 schrieb Nama:
>
> I have just acquired an Apple 2 port Parallel card so that I can hook
> up my X/Profile and my newly built IDEfile. The problem is that the
> card only works in slot 2.
> Slot 1 produces error 10738 when trying to boot from either the
> X/Profile or IDEfile. The card is not even recognized in slot 3. Slot 2
> seems to work perfect however. The problem is I need slot 2 for my SCSI
> card and drive, otherwise it won't fit.
>
> Anybody had a similar problem?
>
> Thanks
>
> Phil
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist -~----------~----~----~----~------~----~------~--~--- Received on 2006-05-26 00:38:07
This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:20 EST