Hello! I've just joined the list. I have a Lisa 2/10 with an XProFile installed. The Lisa has a working 400kb floppy drive (formats, writes to, and reads 400kb disks fine). With the XProfile I have MacWorks Plus 1.0.18 with System 6.0.2 on a compact flash card. I have no other drive installed. The Lisa has 1 Mb of ram (two 500kb boards). I've soldered together a Sun Remarketing SCSI expansion board and want to use it. When I've got the board installed and hooked up to my AppleCD 600e (CD installed and device turned on) I don't see any SCSI device mounted when I look at my MacWorks desktop. I've also got an AppleCD 300i if the 600e is too modern. I can't find anything written about using the Sun Rem SCSI card on the web. Ultimately I would like to use the card to interface with a 100mb Zip drive, if possible and/or a CDROM drive to load software and exchange files between my modern computer and the Lisa, if possible. I would appreciate any advice I can get about using the Sun Rem SCSI card. Thank you very much!
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist?hl=en -~----------~----~----~----~------~----~------~--~---
. Received on 2015-07-15 16:44:01
This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:15 EST